Baud Rate: 16 Mbit
Insulation Protection: ± 15 kV
Over Current Protection: Yes
Connector: DG142V-5.08
Serial Standards: RS-422 / RS-485
Product Dimensions: 222x146x55 mm
Dual Parallel Input Automatic Channel Selection
NS-0208x3
NS-0208x3
The NS-0208x3 RS422/485 Multiplexer multiplexes the data (NMEA, special data, etc.) in the RS422/485 communication protocol sent from any system and sends it to the systems simultaneously. It has two triple serial RS-422/485 inputs and eight triple serial RS-422/485 output
connectors. It allows data transfer at desired baud rates up to 16 Mbps.
NS-0208x3 RS422/485 Multiplexer has two bypass lines. It transmits the data received from the KN13/14 BYP connector from the KN13/14 IN connector. Even when the power of the unit is turned off, the bypass connection continues uninterrupted data transfer between the
lines
- Up to 16 Mbit Data Transfer
- LED Indicators for Power and Signal Status
- Low Capacitance Unidirectional High Speed Protection Designed to Protect Against Faults from Short Circuit, Power Loss, Induction and Lightning Surges
Baud Rate: 16 Mbit
Insulation Protection: ± 15 kV
Over Current Protection: Yes
Connector: DG142V-5.08
Serial Standards: RS-422 / RS-485
Product Dimensions: 222x146x55 mm
Dual Parallel Input Automatic Channel Selection
- Up to 16 Mbit Data Transfer
- LED Indicators for Power and Signal Status
- Low Capacitance Unidirectional High Speed Protection Designed to Protect Against Faults from Short Circuit, Power Loss, Induction and Lightning Surges
