SNT-X

SNT-X

SNT-X series Ethernet converters are designed for uninterrupted communication under harsh conditions. It converts 8 devices using serial port to 10/100 Ethernet protocol with just a simple configuration interface and enables these devices to be connected to the network.

With the easy-to-use interface of the HTTP or Windows utility, it is possible to monitor and adjust the settings of the devices connected to the SNT-X series.

The SNT-X series provides convenience in monitoring the operation of the existing system with LED indicators (System, serial Tx/Rx and Ethernet), identifying and solving problems in the field. The LEDs on the SNT-X series provide status display not only for the system and network they are in, but also for other serial devices connected.

The IT-friendly SNMP I/Os of the SNT-X series can be easily integrated into existing network management systems to monitor the system and ensure security. These SNMP solutions; It can be used to monitor system conditions such as temperature, humidity, power, pressure, noise, on/off status and vibration.

Baud Rate: 12,5 Mbit/s

Insulation Protection: ± 15 kV

Over Current Protection: Yes

Input Voltage: 18 – 36 VDC

Virtual Serial (USR-VCOM): Windows 2000 or higher (32-bit / 64-bit)

Configuration Options: Windows Utility, Web Console (HTTP / HTTPS)

Protocols: TCP/IP, UDP, NDS, DHCP, HTTP, ARP, NetBIOS, DNS

Linux Real TTY Drivers: Kernel versions 2.4.x, 2.6.x, 3.x, 4.x and 5.x

Time Management: SNTP

Connector: KLEMENS 5X1 – USB-MINI-B – RJ45-MAGjack – MIL-DTL-38999

Serial Standards: RS-422/485 – USB – Ethernet 10/100 – CANBUS

Operating Modes: Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client, TCP Server, UDP

Product Dimensions: 240x140x15 mm

Environmental Requirements: MIL-STD-810

EMI/EMC: MIL-STD-461

Microcontroller: STM32H7 ARM CORTEX 32bit -M7 CPU, 480 MHz, 2MB Flash, 1MB RAM

10/100BaseT(X) Ports (RJ45 connector) 1,5 kV( built-in) Ethernet (x1)

Isolated high speed 16 Mbps Full Duplex RS422/485 (x8)

5 kVrms isolated CANBUS (x1) (CANH and CANL signal line protection up to ±40 volts)

USB port

Standard TCP/IP interface and versatile TCP/UDP operating modes

SNMP MIB-II for network management

Auto restart trigger - Built-in WDT

Remote com port connection with Virtual COM port

1, 4 and 8 port models

  • Programmable/Selectable input port
  • Socket models: TCP server, TCP client, UDP
  • Configuration with HTTP or Windows utility
  • Real Time Operating System
  • SNMP MIB-II for network management
  • 2 kV isolation protection

SNT-X PDF CATALOG

SIZE: 9.843 KB